Radiance data collected by Landsat 5 Thematic Mapper (TM) sensors can be affected by atmospheric conditions, sun position, sensor view angle, surface slope and surface aspect.
Surfaces with varying terrain can introduce inconsistencies to optical satellite images through irradiance and bidirectional reflectance distribution function (BRDF) effects. For example, slopes facing the sun appear brighter compared with those facing away from the sun. Likewise, many surfaces on Earth are anisotropic in nature, so the signal picked up by a satellite sensor may differ depending on the sensor’s position.
These need to be reduced or removed to ensure the data is consistent and can be compared over time.
What this product offers
This product takes Landsat 5 TM imagery captured over the Australian continent and corrects the inconsistencies across land and coastal fringe. It achieves this using Nadir corrected Bi-directional reflectance distribution function Adjusted Reflectance (NBAR).
However, in addition, this product applies terrain illumination correction to correct for varying terrain.
The resolution is a 30 m grid based on the USGS Landsat Collection 1 archive.
- DEA Surface Reflectance (Landsat 5 TM)
- DEA Surface Reflectance NBAR (Landsat 5 TM)
- DEA Surface Reflectance OA (Landsat 5 TM)
- Li, F., Jupp, D. L. B., Reddy, S., Lymburner, L., Mueller, N., Tan, P., & Islam, A. (2010). An evaluation of the use of atmospheric and BRDF correction to standardize Landsat data. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 3(3), 257–270. https://doi.org/10.1109/JSTARS.2010.2042281
- Li, F., Jupp, D. L. B., Thankappan, M., Lymburner, L., Mueller, N., Lewis, A., & Held, A. (2012). A physics-based atmospheric and BRDF correction for Landsat data over mountainous terrain. Remote Sensing of Environment, 124, 756–770. https://doi.org/10.1016/j.rse.2012.06.018
|Link to data||THREDDS|
|Code examples||Jupyter notebook|
|Open Data Cube product configuration||https://github.com/GeoscienceAustralia/dea-config/tree/master/dev_3-0-0/products/ga-landsat-ard-3-0-0|
|CMI RESTful node ID||477|
|NCI project code||xu18|
Open Data Cube
This product is contained in the Open Data Cube instance managed by Digital Earth Australia (DEA). This simplified process allows you to query data from its sub-products as part of a single query submitted to the database.
Landsat’s Earth Observation (EO) sensors measure radiance (brightness of light), which is a composite of:
- surface reflectance
- atmospheric condition
- interaction between surface land cover, solar radiation and sensor view angle
- land surface orientation relative to the imaging sensor
It has been traditionally assumed that Landsat imagery displays negligible variation in sun and sensor view angles. However, these can vary significantly both within and between scenes, especially in different seasons and geographic regions (Li et al. 2012).
Surface reflectance correction models
This product represents standardised optical surface reflectance using robust physical models to correct for variations and inconsistencies in image radiance values.
It delivers modelled surface reflectance from Landsat 5 TM data using physical rather than empirical models. This ensures that the reflective value differences between imagery acquired at different times by different sensors will be primarily due to on-ground changes in biophysical parameters rather than artefacts of the imaging environment.
This product is created using a physics-based, coupled Bidirectional Reflectance Distribution Function (BRDF) and atmospheric correction model that can be applied to both flat and inclined surfaces (Li et al. 2012). The resulting surface reflectance values are comparable both within individual images and between images acquired at different times.
For more information on the BRDF/Albedo Model Parameters product, see MCD43A1 Collection 6.
To improve access to Australia’s archive of Landsat TM/ETM+/OLI data, several collaborative projects have been undertaken in conjunction with industry, government and academic partners. These projects have enabled implementation of a more integrated approach to image data correction that incorporates normalising models to account for atmospheric effects, BRDF and topographic shading (Li et al. 2012). The approach has been applied to Landsat TM/ETM+ and OLI imagery to create baseline surface reflectance products.
The advanced supercomputing facilities provided by the National Computational Infrastructure (NCI) at the Australian National University (ANU) have been instrumental in handling the considerable data volumes and processing complexities involved with the production of this product.
Image format specifications
band01, band02, band03, band04, band05, band07
|No data value||-999|
|Valid data range||[1,10000]|
|Tiled with X and Y block sizes||512x512|
|Compression||Deflate, Level 6, Predictor 2|
Resampling: GDAL default (nearest)
Overview X&Y block sizes: 512x512
|Output CRS||As specified by source dataset; source is UTM with WGS84 as the datum|
|RGB combination||Red: band 3
Green: band 2
Blue: band 1
|Resolution||X and Y directions each resampled to 10% of the original size|
|Compression||JPEG, Quality 75 (GDAL default)
PHOTOMETRIC colour model: YCBCR
Input minimum: 10
Input maximum: 3500
Output minimum: 0
Output maximum: 255
|Output CRS||Geographics (Latitude/Longitude) WGS84|
Accuracy and limitations
Atmospheric correction accuracy depends on the quality of aerosol data available to determine the atmospheric profile at the time of image acquisition.
BRDF correction is based on low resolution imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS), which is assumed to be relevant to medium resolution imagery such as that captured by Landsat 5 TM. BRDF correction is applied to each whole Landsat 5 TM scene and does not account for changes in land cover. It also excludes effects due to topographic shading and local BRDF.
The algorithm assumes that BRDF effect for inclined surfaces is modelled by the surface slope and does not account for land cover orientation relative to gravity (as occurs for some broadleaf vegetation with vertical leaf orientation).
The algorithm also depends on several auxiliary data sources:
- Availability of relevant MODIS BRDF data
- Availability of relevant aerosol data
- Availability of relevant water vapour data
- Availability of relevant DEM data
- Availability of relevant ozone data
Improved or more accurate sources for any of the above listed auxiliary dependencies will also improve the surface reflectance result.
Results were compared with data gathered at two field sites, Lake Frome and Gwydir. The average RMSD was found to be 0.027 reflectance units.
The technical report containing the data summary for the Phase 1 DEA Surface Reflectance Validation is available: DEA Analysis Ready Data Phase 1 Validation Project : Data Summary
- USGS Collection 1 Landsat 5 Thematic Mapper
- SRTM DSM/DEM data
- Ephemeris Data
- Aerosol Optical Depth
- Precipitable Water for Entire Atmosphere
- MCD43A1 Collection 6
- Kuruzc 2005 TOA Solar Irradiance
- Ozone data
- Longitude and Latitude Calculation
- Satellite and Solar Geometry Calculation
- Aerosol Optical Thickness Retrieval
- BRDF Shape Function Retrieval
- Ozone Retrieval
- Elevation Retrieval and Smoothing
- Slope and Aspect Calculation
- Incidence and Azimuthal Incident Angles Calculation
- Exiting and Azimuthal Exiting Angles Calculation
- Relative Slope Calculation
- Terrain Occlusion Mask
- Atmospheric Correction Coefficients Calculation
- Bilinear Interpolation of Atmospheric Correction Coefficients
- Surface Reflectance Calculation (NBAR)
Schema / spatial extent
Geoscience Australia Landsat Collection 3
|Coordinate reference system||Universal Transverse Mercator (variable)|
|Cell size X||30.00|
|Cell size Y||30.00|
OwnerCommonwealth of Australia (Geoscience Australia)
Principal contributorsFuqin Li, David Jupp, Joshua Sixsmith, Lan-Wei Wang, Passand Dorj, Alexander Vincent, Imam Alam, Jeremy Hooke, Simon Oliver, Medhavy Thankappan
Subject matter experts
Fuqin Li, David Jupp, Joshua Sixsmith
LicenseCC BY Attribution 4.0 International License
© Commonwealth of Australia (Geoscience Australia) 2020. Creative Commons Attribution 4.0 International License.